Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: LEDdriveDescription: Demo Bd Ssl5031 Led Dvr 230V 9W13831+$881.469710+$850.540950+$846.6748100+$842.8087150+$836.6230250+$831.2104500+$825.79791000+$819.6121 -
![]()
Category: LEDdriveDescription: Power Management IC Development Tools 500mA Programmable Charge Pump LED Drvr38821+$532.611010+$518.716850+$508.0646100+$504.3595200+$501.5806500+$497.87551000+$495.55982000+$493.2441 -
![]()
Category: LEDdriveDescription: LED Driver 1Segment 3.3V/5V 10Pin DFN EP60161+$167.168610+$162.807750+$159.4643100+$158.3014200+$157.4292500+$156.26631000+$155.53952000+$154.8127 -
![]()
Category: LEDdriveDescription: LED DRVR 2Segment 3.3V/5V 6Pin SOT-23 Bulk56955+$5.464825+$5.060050+$4.7766100+$4.6552500+$4.57422500+$4.47305000+$4.432610000+$4.3718 -
![]()
Category: LEDdriveDescription: EXAR SP6699EB Evaluation Board, Step Up White LED Driver, 30V, 1 Output, SP669991271+$417.858310+$406.957650+$398.6004100+$395.6936200+$393.5135500+$390.60661000+$388.78992000+$386.9731 -
![]()
Category: LEDdriveDescription: Constant current LED driver, RCD-24 series - Non isolated wiring can drive up to ten 2W power LED constant current sources. The output current accuracy is ± 2%, the output current stability is ± 1%, and the efficiency is up to 96%. Wide input voltage range short circuit protection compact package connection data - wire | Function 1 (red) |+Vin 4 (black) | GND 5 (brown) | - VOut 6 (yellow) |+VOut # # #. Note that the rated value will not decrease at operating temperature. The average time between failures complies with MIL-HDBK-217F standard (25 ° C). # # # LED driver88371+$129.372710+$125.997850+$123.4103100+$122.5103200+$121.8353500+$120.93541000+$120.37292000+$119.8104 -
![]()
Category: LEDdriveDescription: 100/150W Power supply, switch mode, RACD100-A RACD150-A series Recom RACD100-A and RACD150-A series high-power dimmable constant current LED drivers provide a constant output current of 1400mA or 700mA (RACD100-A) at voltages ranging from 50V to 142V, and 1400mA, 1050mA or 700mA (RACD150-A) at voltages ranging from 60V to 210V. Both series of LED drivers support dimming through PWM or 1-10V signals, and are fully IP67 sealed, suitable for outdoor and indoor applications. These constant current LED drivers have a wide input range of 90 to 305V AC, with a full load efficiency of over 93%. They have active PFC and a power factor of over 0.98. They also provide comprehensive protection against short circuits, overloads, and overheating conditions. The two series of LED drivers combine the market demand for high voltage output, dimming function, and compact size, and have obtained green chip certification for high efficiency, low THD, and high power factor. The ideal applications of these constant current LED drivers are high-power area lighting, parking lots, warehouses, and safety lighting. High output voltage universal AC input constant current operation active power factor correction IP67 design, suitable for indoor and outdoor compact digital PWM and analog voltage dimming # # # Standard UL8750 EN61347-2-13 # # # Recom LED driver16791+$942.408410+$909.341450+$905.2080100+$901.0747150+$894.4613250+$888.6746500+$882.88781000+$876.2744 -
![]()
Category: LEDdriveDescription: 60W LED Driver, constant current, RACD60-A series Recom RACD60-A series is a series of dimmable LED drivers used for constant current LED lighting fixtures. RACD60-A has an input voltage range of 90 to 350V AC, which means they can be used globally. These two types of power supplies have a working efficiency of up to 88%, with low THD and active PFC, a power factor of 0.98, and the RACD60-A series can prevent short circuits, overloads, and overheating. These LED drivers come with a three in one dimming function that can simulate PWM、 Or external resistor dimming for control. Due to their IP67 rated housing, these LED drivers are dustproof and moisture-proof, and can be installed outside of industrial or building environments as well as in damp rooms such as bathrooms or basements. They are suitable for high brightness LED products with built-in active PFC function, overvoltage, short circuit, and overheating protection, and built-in three in one dimming IP67 rating # # # Standard UL8750 EN61347-1 EN61347-2-13 EN61000-3-2 Class C EN61000-3-3 EN61000-4-2,3,4,5,6,8,11 EN61547 EN55015 FCC15 # # # Recom LED Drivers53771+$289.332010+$281.784250+$275.9975100+$273.9848200+$272.4752500+$270.46251000+$269.20452000+$267.9465 -
![]()
Category: LEDdriveDescription: PCA9634 Series 25 mA 5.5 V 1 MHz Surface Mount 8-bit I2C Bus LED Driver - SOIC-20889710+$7.6980100+$7.3131500+$7.05651000+$7.04372000+$6.99245000+$6.92827500+$6.876910000+$6.8512 -
![]()
Category: LEDdriveDescription: IC LED DVR 8CH 60mA BOOST 24VQFN80755+$22.950750+$21.9699200+$21.4207500+$21.28341000+$21.14602500+$20.98915000+$20.89107500+$20.7930 -
![]()
Category: LEDdriveDescription: PMIC - LED driver Microchip Technology MSL3080-IU DC-DC converter VQFN 24 Surface-mount74025+$23.637550+$22.6274200+$22.0617500+$21.92031000+$21.77882500+$21.61725000+$21.51627500+$21.4152 -
![]()
Category: Gaskets and supportsDescription: BIVAR LTM-350 LED spacer column, 8.9MM, nylon90065+$1.636225+$1.515050+$1.4302100+$1.3938500+$1.36962500+$1.33935000+$1.327110000+$1.3090 -
![]()
Category: LEDdriveDescription: Serial interface,+2.7V to+5.5V, 5-bit and 8-bit LED display drivers Serial Interface,+2.7V to+5.5V, 5- and 8-Digit LED display drivers66121+$79.987110+$76.5094100+$75.8834250+$75.3965500+$74.63141000+$74.28372500+$73.79685000+$73.3795 -
![]()
Category: LEDdriveDescription: Serial Interface, 8-bit LED Display Drivers Serial Interface, 8-Digit LED Display Drivers26291+$96.562110+$92.3637100+$91.6080250+$91.0202500+$90.09661000+$89.67682500+$89.08905000+$88.5852 -
![]()
Category: LEDdriveDescription: LED DRVR Boost 4CH PWM 55V 0.2A 20Pin SOIC24245+$22.819750+$21.8445200+$21.2984500+$21.16181000+$21.02532500+$20.86935000+$20.77187500+$20.6742 -
![]()
Category: LEDdriveDescription: Smart, simple solutions for the 12 most common design concerns87231+$100.389310+$96.0245100+$95.2388250+$94.6278500+$93.66751000+$93.23112500+$92.62005000+$92.0962 -
![]()
Category: LEDdriveDescription: 60W LED Driver, constant current, RACD60-A series Recom RACD60-A series is a series of dimmable LED drivers used for constant current LED lighting fixtures. RACD60-A has an input voltage range of 90 to 350V AC, which means they can be used globally. These two types of power supplies have a working efficiency of up to 88%, with low THD and active PFC, a power factor of 0.98, and the RACD60-A series can prevent short circuits, overloads, and overheating. These LED drivers come with a three in one dimming function that can simulate PWM、 Or external resistor dimming for control. Due to their IP67 rated housing, these LED drivers are dustproof and moisture-proof, and can be installed outside of industrial or building environments as well as in damp rooms such as bathrooms or basements. They are suitable for high brightness LED products with built-in active PFC function, overvoltage, short circuit, and overheating protection, and built-in three in one dimming IP67 rating # # # Standard UL8750 EN61347-1 EN61347-2-13 EN61000-3-2 Class C EN61000-3-3 EN61000-4-2,3,4,5,6,8,11 EN61547 EN55015 FCC15 # # # Recom LED Drivers68911+$502.659310+$489.546450+$479.4932100+$475.9965200+$473.3739500+$469.87711000+$467.69172000+$465.5062 -
![]()
Category: LEDdriveDescription: 100/150W Power supply, switch mode, RACD100-A RACD150-A series Recom RACD100-A and RACD150-A series high-power dimmable constant current LED drivers provide a constant output current of 1400mA or 700mA (RACD100-A) at voltages ranging from 50V to 142V, and 1400mA, 1050mA or 700mA (RACD150-A) at voltages ranging from 60V to 210V. Both series of LED drivers support dimming through PWM or 1-10V signals, and are fully IP67 sealed, suitable for outdoor and indoor applications. These constant current LED drivers have a wide input range of 90 to 305V AC, with a full load efficiency of over 93%. They have active PFC and a power factor of over 0.98. They also provide comprehensive protection against short circuits, overloads, and overheating conditions. The two series of LED drivers combine the market demand for high voltage output, dimming function, and compact size, and have obtained green chip certification for high efficiency, low THD, and high power factor. The ideal applications of these constant current LED drivers are high-power area lighting, parking lots, warehouses, and safety lighting. High output voltage universal AC input constant current operation active power factor correction IP67 design, suitable for indoor and outdoor compact digital PWM and analog voltage dimming # # # standard UL8750 EN61347-2-1359411+$872.377010+$841.767350+$837.9411100+$834.1149150+$827.9929250+$822.6362500+$817.27951000+$811.1576 -
![]()
Category: LEDdriveDescription: 100/150W Power supply, switch mode, RACD100/RACD150 series Recom RACD 100 and RACD 150 series are fully sealed IP67 LED drivers, both series have dual-mode operation for constant current or constant voltage, they have active PFC and power factor over 0.98, and also provide comprehensive protection against short circuits, open circuits, overloads, and overheating situations. These Recom power supplies are Class 1, packaged in metal enclosures, with a rated ambient temperature of -30 ° C to+70 ° C and a maximum enclosure temperature of 95 ° C. RACD100 and RACD150 are suitable for indoor and outdoor use; Applications include street and pedestrian lighting, LED signs, parking lots, public buildings, and tunnels. Universal AC input constant voltage and constant current operation CE and UL certification level 1 LED driver active power factor correction IP67 designed for indoor and outdoor use cooled by natural air convection 5-year warranty # # # UL 8750 and EN 61347-1 # # Recom LED driver79231+$626.782310+$604.789950+$602.0409100+$599.2918150+$594.8933250+$591.0447500+$587.19601000+$582.7975 -
![]()
Category: LEDdriveDescription: Recom 60W Constant Current LED Power Supply - RACD60 Series RACD60 Series 60W Open Rack and Constant Current LED Power Supply with Single Output, Universal AC Input, and Active Power Factor Correction. This 60W constant current LED power supply comes with a user adjustable output current limit and dual-mode operation: CV mode, where the power supply serves as a fixed voltage source when the load is below the preset current limit. In CC mode, when the load exceeds the preset current limit, the power supply acts as a fixed current source. These two modes enable the LED power supply to be used together with both CV and CC LED modules. Universal input voltage range, constant current output, dual-mode CV or CC output, active power factor correction, user adjustable current limiting, overload and short circuit protection through 300mm cable connection, EMC compliance with EN55015, EN61347-1, EN61347-2-13, harmonic current compliance with EN61000-3-2 (Class C, full load) and EN61000-3-3 # # # Note: For industrial use only, not within the scope of Regulation (EC) No. 125/2009. The average time between failures complies with MIL-HDBK-217F standard # # # recognized cULus # # standard UL8750, cUL8750, EN61347 # # # Recom - constant current LED power supply12021+$285.891210+$278.433150+$272.7153100+$270.7265200+$269.2349500+$267.24611000+$266.00312000+$264.7601 -
![]()
Category: LEDdriveDescription: 16W The PLD-16 series Mean Well LED driver is a 16W single output constant current LED power supply. The PLD-16 series has built-in active PFC function with short circuit and over temperature protection. This IP30 grade device features a fully insulated plastic casing and stress relief design, suitable for LED lighting applications. Built in active PFC function, short circuit and over temperature protection, cooled by natural air convection, fully insulated plastic casing, Class 2 power supply equipment, IP30 design, suitable for indoor LED lighting applications, 100% full load aging testing, low cost and high reliability, 3-year warranty, Mean Well LED driver, constant current88961+$113.430310+$108.4985100+$107.6108250+$106.9203500+$105.83541000+$105.34222500+$104.65175000+$104.0599 -
![]()
Category: LEDdriveDescription: MEAN WELL PLN-60-12 AC/DC LED power supply, active PFC, PLN-60 series, 90 V, 295 V, 60 W, 5 A, 12 V71091+$354.186210+$344.946650+$337.8628100+$335.3989200+$333.5510500+$331.08711000+$329.54722000+$328.0072 -
![]()
Category: LEDdriveDescription: LED Driver, EXAR # # # LED driver high integration dedicated high current LED driver IC series, used for lighting and display backlight lighting applications.342410+$9.1104100+$8.6549500+$8.35121000+$8.33602000+$8.27535000+$8.19947500+$8.138610000+$8.1083 -
![]()
Category: Gaskets and supportsDescription: LED Strip Mount, Vertical, 3mm or 5mm* LED, 0.25in., 2 Lea71215+$1.942725+$1.798850+$1.6980100+$1.6549500+$1.62612500+$1.59015000+$1.575710000+$1.5541 -
![]()
Category: Gaskets and supportsDescription: BIVAR ELM 2-3MM LED mounting bracket, 3MM, PVC, black13075+$2.717625+$2.516350+$2.3753100+$2.3150500+$2.27472500+$2.22445000+$2.204210000+$2.1740 -
![]()
Category: LEDdriveDescription: RS - 100W Waterproof (IP67) SMPSU external, switch mode, sealed IP67 rating, constant voltage power supply designed for indoor or outdoor installation with high efficiency, long life, and high reliability. Suitable for LED lighting and strip screen applications, it can withstand 300V AC surge input for 5 seconds, 100% full load aging test short circuit, overcurrent, overvoltage protection 300mm not terminated, 2-core 18AWG input lead 300mm not terminated, 2-core 14AWG output lead EMC compliant with EN 55022 Class B harmonic current compliant with EN 61000-3-2, -3 # # # # Note for industrial use only, not within the scope of Regulation (EC) No. 125/2009. The power begins to decrease above 50 ° C (721-1768 and 721-1761 are above 40 ° C). The average time between failures complies with MIL-HDBK-217F standard. ###Switch mode - Obtain IP rating83961+$170.205810+$165.765650+$162.3615100+$161.1774200+$160.2894500+$159.10541000+$158.36542000+$157.6253 -
![]()
Category: LEDdriveDescription: LED Lighting development tool LED 7706 LIGHT EVAL BOARD37761+$109.971110+$105.1897100+$104.3291250+$103.6597500+$102.60781000+$102.12962500+$101.46025000+$100.8865 -
![]()
Category: LEDdriveDescription: 60W Multi level output current LED power supply LCM-60 series This LED driver is a 60W multi-level output circuit LED power supply with built-in press dimming function. This series has built-in active PFC function with short circuit, overvoltage, and over temperature protection. This device features a fully insulated plastic casing and stress relief design, suitable for LED lighting applications. Output current level can be selected through DIP switch. Limited to 180-295V AC input. Built in active PFC function for short circuit, overvoltage, and over temperature protection. Cooling is achieved through natural air convection. Fully insulated plastic shell Class II power supply device, without FG. Built in 0-10V DC and PWM signal regulation function. Built in 12V/50mA auxiliary output. External NTC temperature compensation function. No load power consumption. Power synchronization function up to 10 devices. Suitable for LED lighting applications. 3-year warranty. RS LED driver67441+$258.972010+$252.216250+$247.0367100+$245.2352200+$243.8840500+$242.08251000+$240.95652000+$239.8305
